High Quality Starter Assembly Line
    The starter assembly line is an effective combination of man and machine, which fully reflects the flexibility of the equipment. It organically combines the conveying system, the accompanying fixture, the online special machine, and the testing equipment to meet the assembly requirements of multiple products. The transmission mode of the assembly line can be synchronous transmission/(mandatory) or non-synchronous transmission/(flexible). According to the choice of configuration, manual...
    От Riri Mei 2020-12-16 02:49:17 0 19
    Introduction Of Extension Drilling Tools Pulley
           In the daily drilling and use of Reaming Bit, due to the harsh working environment, some vulnerable parts of the engineering Reaming Bit are damaged. Failure to check and clean the dust and oil stains on the components in time will greatly shorten the service life of the engineering rig.        Next, we will discuss the inspection of crawler anchor drilling rig components at any time during daily...
    От Drilling Kaiqiu 2020-12-03 05:51:19 0 12
    The History Of Wood Drill Bits
    Now the alloy drill bits on the market are generally made of tungsten steel monolithic drill bits. Although the material is the same, the product quality of each brand is very different due to the processing technology. Imported and domestic alloy drills are also very different. Therefore, domestic graduate students produced HSS cobalt drill bit . The biggest difference between high-speed steel drills and cobalt-containing drills is the amount of cobalt. The higher the cobalt content,...
    От Jeeja Tools 2020-11-27 02:26:39 0 16
    Details Of The Installation Of Extension Drilling Tools
        Our drilling of water wells is a very large project, so we must pay special attention. We must strictly follow the rules of use when using Reaming Bit. The editor below will briefly introduce the installation precautions of Reaming Bit. The installation of the drilling rig should be carried out by a skilled operator, and a special person is responsible for the command. The drill stand shall not be erected in heavy rain, heavy snow and strong winds above level 6.2. Before...
    От Drilling Kaiqiu 2020-11-26 02:55:13 0 14
    Reaming Bit Keeps Good Lubrication
    Features of    Reaming Bit    1. The floating bearing structure is adopted. The floating elements are made of new materials with high strength, high elasticity, high temperature resistance and high wear resistance, and the surface is treated with solid lubricant. While reducing the relative linear velocity of the bearing pair, it reduces the temperature rise of the friction surface, which can effectively improve the bearing life and bearing reliability under the conditions of high drilling...
    От Drilling Kaiqiu 2020-11-12 02:48:39 0 24
    Introduction Of Barrel Mold
    Plastic barrels produced by Pail Moulds are now relatively common packaging containers in daily life, and plastic barrels are also used in more and more places. Due to the different places of use, the materials used in the production of plastic barrels are also different. Let's explain to you what the material used for plastic barrels is from our Qingyun Xiangtai plastic barrel manufacturer. The material used for the blow molding grade 10 liter plastic barrel is low-pressure high-density...
    От Rixiang Huangyan 2020-10-23 03:21:29 0 22
    High Bay Lights And Lawn Lights Products
    We are a highbay light manufacturer. The main features of high bay lights are introduced as follows: one plate is used for global illumination, and the suspension is high. The light source adopts metal halide lamps, energy-saving lamps, LEDs, electrodeless lamps and other high color rendering index light sources, which must meet the national standards GB7000.1-2002, GB7000.10-1999 According to different places, it should have anti-corrosion, dust-proof, water-sprinkling and explosion-proof...
    От Guangke Ningbo 2020-10-22 07:47:32 0 16
    The Main Advantages Of Led Wall Lights
    We are one of the led wall light manufacturers. Here are the main advantages of LED wall lamp: ◎High efficiency: The luminous efficiency of high-power LED wall lamps has exceeded 100 lm/W, and because the spectrum of LEDs is almost entirely concentrated in the visible light band, the luminous efficiency is far greater than that of incandescent lamps and is catching up with energy-saving lamps and fluorescent lamps. ◎High light quality: Since there are no ultraviolet and infrared rays in the...
    От Guangke Ningbo 2020-10-22 07:37:17 0 14
    Polyurethane Waterproof Coating Type
    Polyurethane Waterproof Coating is an isocyanate group-containing prepolymer formed by addition polymerization of isocyanate, polyether, etc., with catalysts, anhydrous additives, anhydrous fillers, solvents, etc., processed by mixing and other processes One-component polyurethane waterproof coating. This type of coating is a reactive curing (moisture curing) coating, which has the characteristics of high strength, high elongation, and good water resistance. Strong adaptability to the...
    От Waterproof Boyu 2020-10-22 06:30:54 0 20
    Reaming Bit Prevents Resonance
    When using Extension Drilling Tools to excavate groundwater, the derrick should be used to prevent the machine from shaking and tilting, but in many cases it is easy to cause the derrick to fall or sink.To prevent the derrick from resonating, it is necessary to strengthen the teaching of safety operating procedures for employees so that they can master the relevant skills; strictly abide by the requirements of relevant laws and regulations, and employees must hold certificates to work,...
    От Drilling Kaiqiu 2020-10-22 02:37:56 0 19
Другие статьи
Категории
Больше
Insharefurniture Plastic Rattan Set: Cleaning and Caring Tips
Keep your Plastic Rattan Set looking gorgeous year after year and in tip top shape in...
От inshare rattanset 2021-02-24 09:51:35 0 2
The NBA 2K21 current-generation demo was released
I really liked the dribbling longer, sounded like it had been harder to spam one move together a...
От Nanlina Nanlina 2020-11-25 03:09:58 0 13
Care About This Problem of This Problem For Medical Mould
Balanced melt flow is the key to successful multi-cavity medical mould- to maximize the quality...
От Zheng Ri1 2020-12-02 06:16:34 0 11
Have you ever encountered these after using body fat scales?
If you are using an electronic body fat scale, you may have a few questions: Sooner or later, the...
От Zheng Tai 2020-07-08 03:37:43 0 38
Advanced and Effective Gas Introduction Method for Color Coated Aluminum Coil
In the research and development of hydrogen removal and purification technology for Color Coated...
От Jia Lubang 2020-05-15 02:03:44 0 85